| Customization: | Available |
|---|---|
| After-sales Service: | Video Technology Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PTD01is internal lacquering machine which sprays epoxy resin on the inner surface of tubes to protect aluminum from forming any chemical reaction with the contents filled inside.
Germ tubes from annealing oven drop into the tube slot and then are pushed into sprayer cup plates by push rod. The first spray gun stretches into tubes and blows out compressed air, eliminating dust and impurities. Germ tubes then rotate with turntable and move to the next station. The second spray gun sprays fluid while cup plate rotates at high speed under the drive of flat belt to make the fluid cover the internal wall uniformly. cup plate moves to next station and repeats the former action to finish the second spraying. Usually, the first spray focuses on side wall and the second straight injection.
Main technical parameters
|
STATION |
8 |
|
|
SPRAY GUN |
3 PIECE |
|
|
TUBE'S DIAMETER |
Ø12.7mm-Ø35mm |
|
|
TUBE'S LENGTH |
≤210mm |
|
|
SPEED |
≤60PCS/MIN |
|
|
MOTOR |
2.2Kw |
FREQUENCY CONTROL |
|
POWER |
5.6Kw |
|
|
AIR PRESSURE |
5.5bar |
WITHOUT WATER AND OIL |
|
AIR CONSUMPTION |
25Nm³/h |
|
|
CONDUCTIVITYOF COATING |
≤62mA |
|
|
WEIGHT |
2200Kg |
|
|
LENGTH |
3000mm |
|
|
WIDTH |
1600mm |
|
|
HEIGHT |
2150mm |
|
){kind=link}